Re: wanted high voltage resistors

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "colin.heath4" <colin.heath4-at-ntlworld-dot-com> 

hi there,
             i have some resistors on the way. but will try the water
resistors out of interest.
cheers
colin

----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, November 19, 2003 12:03 AM
Subject: Re: wanted high voltage resistors


 > Original poster: Jim Lux <jimlux-at-earthlink-dot-net>
 >
 > At 12:43 PM 11/18/2003 -0700, you wrote:
 > >Original poster: "colin.heath4" <colin.heath4-at-ntlworld-dot-com>
 > >hi jim,
 > >         i had looked at the water resistor route but wasnt sure what
phsical
 > >size they would be for 300k ohm
 > >cheers
 > >colin
 >
 > Depending on the power handling requirements, think in terms of 1/4" ID
 > tubing (or aquarium tubing) a foot or so long (you can coil it up).
 >
 > It's cheap to do the experiment.  Get some tubing, get some copper
sulfate,
 > get some brass rod, and try it out.
 >
 >
 >