Re: wanted high voltage resistors

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Jim Lux <jimlux-at-earthlink-dot-net> 

At 12:43 PM 11/18/2003 -0700, you wrote:
>Original poster: "colin.heath4" <colin.heath4-at-ntlworld-dot-com>
>hi jim,
>         i had looked at the water resistor route but wasnt sure what phsical
>size they would be for 300k ohm
>cheers
>colin

Depending on the power handling requirements, think in terms of 1/4" ID 
tubing (or aquarium tubing) a foot or so long (you can coil it up).

It's cheap to do the experiment.  Get some tubing, get some copper sulfate, 
get some brass rod, and try it out.