Re: Dan's boards

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jonathan Peakall by way of Terry Fritz <teslalist-at-qwest-dot-net>" <jpeakall-at-madlabs.info>

John,

I bought a WES51 by Weller 6 months or so ago. Very nice iron, I am quite
happy with it. It was around US $100. Nice vari temp, heats up quick and
auto shuts off, a good feature for me.

Jonathan


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, April 05, 2003 6:36 PM
Subject: Dan's boards


 > Original poster: "John Richardson by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <jprich-at-up-dot-net>
 >
 > Dan,
 > Got your board today.  It sure looks impressive.  I've never done anything
 > like this before, and the extent of my "fine" work in fabricating
 > components involves 5/32 7018 and 3/4 plate.  Gonna have to get a
soldering
 > iron.  Are there any recommendations as to what type or model I should
 > purchase for working on items like these boards and MMCs?  I see that they
 > are priced anywhere from 30-1000 dollars, and 15 or better watts.  I would
 > also like to here if anyone has completed their boards, and how well they
 > are working.
 >
 > Thanks,
 > John Richardson
 >
 >
 >
 >