Re: water filled tubing primary?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "robert heidlebaugh by way of Terry Fritz <twftesla-at-qwest-dot-net>" <rheidlebaugh-at-desertgate-dot-com>

Comment 2: pure Nickel will not contaminate pure distilled water like copper
or stainless steel. Most people dont know pure distilled water is very
carrosive.  In the USAF laboratory our 316 stainless steel 3/4" pipes were
carroded to the point of leaking  in 1 year until we replaced them all with
pure nickel pipe.  It was expensive $$$
   Robert  H 

> From: "Tesla list" <tesla-at-pupman-dot-com>
> Date: Tue, 10 Sep 2002 23:58:13 -0600
> To: tesla-at-pupman-dot-com
> Subject: Re: water filled tubing primary?
> Resent-From: tesla-at-pupman-dot-com
> Resent-Date: Wed, 11 Sep 2002 00:02:45 -0600
> 
> Original poster: "Christopher Boden by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <chrisboden-at-hotmail-dot-com>
> 
> Reminds me of my famous idea for a water capacitor (long story). In theory,
> yes a water filled primary would work, then again, so does communism :) The
> technical drawbacks and complications would be serious though. As a rule
> water+HV is a bad idea, and things get really weird. *REALLY* pure water is
> actually an insulator, and they discharge the Z-Machine (a collection of
> connected GIGANTIC Marx banks that could accurately replicate the power of
> God sneezing) into a bog pool of water (from the pics I've seen it actually
> looks like it SITS in a tank of water. Though how you keep THAT much water
> THAT clean I have no idea. It works something like even putting electrodes
> in the water is enough to contaminate it to the point of no longer being an
> insulator or something, I don't know all the details (it's facinating
> though).
> 
> Using pins for teh tap would be bad because the contact point is *really*
> small. If it leaked you've got HV dripping all over. It's going to be
> *really* lossy (tubes of water are used for HV resistors on occasion). Etc
> ad nauseum.
> 
> It would be fun to tinker with though :) On a SMALL coil that you can easily
> overpower it would be fun, and a novel approach if nothing else.
> Good idea...maybe not practical, but good idea. :)
> 
> Keep inventing, you could never do worse than the Boden Density Capacitor :)
> so noone will ever make fun of ya for a crazy coiling idea.
> 
> 
> 
> 
> 
> 
>>> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
>>>>> <Beans45601-at-aol-dot-com>
> 
>>>> Could you (in theory) use water filled (lets say, 1/4 inch) tubing for
>>>> your
> primary?  I was thinking that you could fill the tubing, cap it off, then
> use
> needles to puncture the tubing to get to the water and thats how you would
> tap
> it and charge it. I know this has lots of flaws in the idea, but, could it
> be
> done?
> thanks
> Adam
> 
> 
> 
> 
> 
> 
> Christopher "Duck" Boden Geek#1
> President / C.E.O. / Alpha Geek
> The Geek Group
> www.thegeekgroup-dot-org
> Because the Geek shall inherit the Earth!
> 
> "He had that rare weird electricity about him--that
> extremely wild and heavy presence that you only see in
> a person who has abandoned all hope of ever behaving
> normally." --Hunter S. Thompson
> 
> 
> 
>