Re: (S)crap (H)eap (I)nspection (T)eam (E)xamination (R)eport

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jonathan Peakall by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jpeakall-at-madlabs.info>

Dan,

PFC caps can be had cheap at http://www.usamfg-dot-net/. I'm not affiliated,
even though when this subject comes up I reccomend 'em. Anyway, they have
good deals on motor run caps, you can even ger multi value ones.

HTH,

Jonathan Peakall


----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, September 03, 2002 9:22 PM
Subject: (S)crap (H)eap (I)nspection (T)eam (E)xamination (R)eport


> Original poster: "Dan by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<toodamtall1-at-yahoo-dot-com>
>
> Hello,
>
> Following is the (F)unds (A)llocation & (R)esource
> (T)ribunal's summary of the team's performance.
>
> Just got outa the (S)crap (H)eap (I)nspections
> (T)onight, as the senior technical field services &
> support manager/supervisor of this (S)crap (H)eap
> (I)nspection (T)eam I'm submitting this report to
> headquarters.
>
> Scouting for some kind of PFC caps, examined and
> reported are;
>
> 2-dryers - gas, took back off/flipped over
> 1-washing machine, took back off/flipped over
> 1-frig, no diss'y, just flipped over
> 1-treadmill, remove bottom cover to reveal 90vdc
> motor(what a piece of crap it was too)
>
> I didn't see anything even closely resembling a metal
> canned object with two wires coming out and all these
> things had motors. Am I looking in the wrong place?
>
> Thanks a lot folks, what'd ya come up with for the
> accronym of the subject line?
>
> Dan--Ft. Lauderdale
>
> ___
>
>
>