Re: LVTC, Energy considerations

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "tesla by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-paradise-dot-net.nz>

Another perspective

For Terry's hypothetical 75kHz coil
Lets say 10joules per "bang" with a 1kV supply. 10J say at 100BPS is still
only a thru put of 1000W

Then C needs to be 20uF and L= 0.22uH. This would be a single 4" turn.

I suspect the primary design will be the challenge perhaps involving a flat
plate with a gap in or vertical sheet with a gap. Maybe two gaps, one with
the switching elements the other with the caps in it

The idea of a SS switching element certainly appeals.
Best Ted L in  NZ