[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Lexan (polycarbonate)

To: tesla-at-pupman-dot-com
Subject: Re: Lexan (polycarbonate)
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Mon, 08 Jul 2002 08:17:09 -0600
Resent-Date: Tue, 9 Jul 2002 18:26:54 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <83QhKD.A.-gF.L93K9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <FutureT-at-aol-dot-com>

In a message dated 7/3/02 2:10:59 PM Eastern Daylight Time, tesla-at-pupman-dot-com
writes:

>
> Cons -- And yes, the stuff will burn when exposed to direct sparks and will
> melt under heat. And it is brittle.  

Gary,

Are you sure you're using Lexan?  I've never seen brittle lexan,
but Lucite (Plexiglas), is very brittle.  

Cheers,
John

Prev by Date: salts and arcs
Next by Date: inductor current limiting for MOTs
Prev by thread: RE: Lexan (polycarbonate)
Next by thread: Re: Lexan (polycarbonate)
Index(es):
- Date
- Thread