[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

MOT Windings

To: tesla-at-pupman-dot-com
Subject: MOT Windings
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 10 Jan 2002 22:38:32 -0700
Resent-Date: Thu, 10 Jan 2002 22:42:39 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <mox8ZD.A.NJC.fsnP8-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Matthew Smith by way of Terry Fritz <twftesla-at-qwest-dot-net>" <matt-at-kbc-dot-net.au>

Hi all

Any tips for removing heater windings from MOTs without grinding off the 
weld and disassembling the whole thing?  I've tended to leave them (ends 
cut and taped) for fear of damaging the other windings.

Cheers

M

-- 
Matthew Smith
KBC, PO Box 150, Kadina, 5554, S. Australia
Ph: (08) 88 212 395  Fx: (08) 82 190 157
http://kbc-dot-net.au

Prev by Date: Re: Small, Medium, Large coil sizes
Next by Date: RE: Staco variac rating differences
Prev by thread: Twin coils was Re: Stand construction
Next by thread: Re: MOT Windings
Index(es):
- Date
- Thread