[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: New Inductance Formula



Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Dave,

The factor 10^-7 needs to be 10^-6 for the equation to work...  Dontcha
just hate that! :o)))  Your equation here will still give an answer off by
a factor of 1/10th...

The units are kind of interesting.  Normally inductance is in the base
units of:

kg-m2/s2-A2 which matches you units!  So if you can get a rock solid
derivation together that the heavy math types would accept, it would be
very interesting!!

Cheers,

	Terry


At 02:43 PM 4/29/2002 -0500, you wrote:
>After completely simplifying the improved Wheeler's formula for inductance
>it comes to:
>
>        (N*R)^2 * 10^-7 * kg * m
>henry = ------------------------
>        [(9*R)+(10*H)] * coul^2
>
>The units N, R, and H are still in inches.
>
>You don't have to do any more work than you previously did, but now you will
>get the correct units.  As an aside, anyone familiar with dimensional
>analysis of permeability will recognize the 10^-7 and instantly realize the
>beauty of this improvement.
>
>Dave
>