[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: muffin fan and Richard quick cap



Original poster: "Mark W. Stolz by way of Terry Fritz <twftesla-at-qwest-dot-net>" <mark_w_stolz-at-hotmail-dot-com>

Ed,

I've used one with almost 4kVA with no melting problems.  I use a microwave 
oven fan for the quenching and it keeps things cool enough.  I will post 
some pictures in the next day or two.

Mark Stolz
Houston, TX


>Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-qwest-dot-net>" 
><evp-at-pacbell-dot-net>
>
>Tesla list wrote:
> >
> > Original poster: "Brian by way of Terry Fritz <twftesla-at-qwest-dot-net>"
><ka1bbg-at-webryders-dot-net>
> >
> > Hi, i used white pvc and it works fine. i took a pill bottle(plastic) 
>and
> > used it like a funnel so the fan blows across the tubes and not in the
> > center. i run a 9kv60 ma neon and measured input is around 550 watts.
> > Adjustment of the gap spacing is time consuming, since the screw is on a
> > radius. i like mine real well. cul brian f.
>
>	Thanks for the dope.  Will give one a try as soon as I can clean off my
>work bench!!!  I want to run a 15 kV, 60 ma transformer, but that's not
>a lot more power, so we'll see.  As for adjustment, all you need is a
>drill that will cut a rectangular slot so you can move the cylinders
>sideways.  I haven't been able to buy one, unfortunately, and have to
>resort to drill holes side by side and filing out the middle.
>
>Ed
>


_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn-dot-com