Re: muffin fan and Richard quick cap

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-qwest-dot-net>" <evp-at-pacbell-dot-net>

Tesla list wrote:
> 
> Original poster: "Brian by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<ka1bbg-at-webryders-dot-net>
> 
> Hi, i used white pvc and it works fine. i took a pill bottle(plastic) and
> used it like a funnel so the fan blows across the tubes and not in the
> center. i run a 9kv60 ma neon and measured input is around 550 watts.
> Adjustment of the gap spacing is time consuming, since the screw is on a
> radius. i like mine real well. cul brian f.

	Thanks for the dope.  Will give one a try as soon as I can clean off my
work bench!!!  I want to run a 15 kV, 60 ma transformer, but that's not
a lot more power, so we'll see.  As for adjustment, all you need is a
drill that will cut a rectangular slot so you can move the cylinders
sideways.  I haven't been able to buy one, unfortunately, and have to
resort to drill holes side by side and filing out the middle.

Ed