[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: drawing of "3 pipe gap"



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jim-at-jlproduction-dot-com>

Hi Jim,
I pulled a "file not found" error.
If you need/want some Web space for a few pics, I could lend you some.
Jim Layton
http://www.jlproduction-dot-com/Tesla.html

***
The URL is really:

http://home.earthlink-dot-net/~jimlux/hv/images/3pipe.GIF

The "GIF" part should be capitals...

http://home.earthlink-dot-net/~jimlux/hv/images/

-Terry
***


-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com] 
Sent: Saturday, April 27, 2002 3:11 PM
To: tesla-at-pupman-dot-com
Subject: drawing of "3 pipe gap"

Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<jimlux-at-earthlink-dot-net>

I've finally done a drawing of my simple 3 pipe gap and posted it
http://home.earthlink-dot-net/~jimlux/hv/images/3pipe.gif

I think this is about the simplest static gap you can build that is
reasonably adjustable with just one movable part. With a small fan
blowing
on it, the sparks distribute nicely over the lengths of the tubes, and
it
runs very cool.

Next up.. I'm going to make it triggered..