Re: drawing of "3 pipe gap"

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>

Curse that FTP.... I'll change it to all lower case...
Got plenty of web space...

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, April 27, 2002 2:19 PM
Subject: RE: drawing of "3 pipe gap"


> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<jim-at-jlproduction-dot-com>
>
> Hi Jim,
> I pulled a "file not found" error.
> If you need/want some Web space for a few pics, I could lend you some.
> Jim Layton
> http://www.jlproduction-dot-com/Tesla.html
>
> ***
> The URL is really:
>
> http://home.earthlink-dot-net/~jimlux/hv/images/3pipe.GIF
>
> The "GIF" part should be capitals...
>
> http://home.earthlink-dot-net/~jimlux/hv/images/
>
> -Terry
> ***
>
>
> -----Original Message-----
> From: Tesla list [mailto:tesla-at-pupman-dot-com]
> Sent: Saturday, April 27, 2002 3:11 PM
> To: tesla-at-pupman-dot-com
> Subject: drawing of "3 pipe gap"
>
> Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <jimlux-at-earthlink-dot-net>
>
> I've finally done a drawing of my simple 3 pipe gap and posted it
> http://home.earthlink-dot-net/~jimlux/hv/images/3pipe.gif
>
> I think this is about the simplest static gap you can build that is
> reasonably adjustable with just one movable part. With a small fan
> blowing
> on it, the sparks distribute nicely over the lengths of the tubes, and
> it
> runs very cool.
>
> Next up.. I'm going to make it triggered..
>
>
>