Re: phasingsrsg

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Garret Sawtell by way of Terry Fritz <twftesla-at-qwest-dot-net>" <sawtellg-at-dteenergy-dot-com>

McMaster Carr sells an inexpensive contact tachometer which works great for
this type of use.

Tesla list wrote:

> Original poster: "colin.heath4 by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <colin.heath4-at-ntlworld-dot-com>
>
> hi
>     im trying to tell if my motor is running in syncronous mode iv
machined the
> armature with two flats so im hoping now it will run at 3000 rpm but i dont
> know if its syncronous how can i tell without expensive strobe lights and the
> such
> the motor is out of a cloths dryer the gap runs ok on my 6.25" coil but not
> sure if its quite right
> many thanks
> colin heath
> the gap can be viewe don my site
> www.geocities-dot-com/colinheath2002/