phasingsrsg

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "colin.heath4 by way of Terry Fritz <twftesla-at-qwest-dot-net>" <colin.heath4-at-ntlworld-dot-com>

hi 
    im trying to tell if my motor is running in syncronous mode iv machined the
armature with two flats so im hoping now it will run at 3000 rpm but i dont
know if its syncronous how can i tell without expensive strobe lights and the
such
the motor is out of a cloths dryer the gap runs ok on my 6.25" coil but not
sure if its quite right
many thanks
colin heath
the gap can be viewe don my site
www.geocities-dot-com/colinheath2002/