[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Primary Tap Question.



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jim-at-jlproduction-dot-com>

"A buss fuse holder is excellent"

I can't find one of these regardless of where I looked. I got many a
puzzled look from many an electrical supply house and ended up with an
alligator clip from a dead battery charger. It is the short stubby kind
as opposed to the long skinny kind used in the 60's by the hippies :)

Far out man...
Jim Layton
http://www.jlproduction-dot-com/forum


-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com] 
Sent: Wednesday, April 17, 2002 7:48 PM
To: tesla-at-pupman-dot-com
Subject: Re: Primary Tap Question.

Original poster: "Gregory Hunter by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <ghunter31014-at-yahoo-dot-com>

A buss fuse holder is excellent. It clips onto 1/4" Cu
tube very securely.

Greg
http://hot-streamer-dot-com/greg

--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "Vince D'Amore by way of Terry
> Fritz <twftesla-at-qwest-dot-net>" <tesla-at-teslafx-dot-com>
> 
> Hello People,
> 
>   My question is: What is the best way or best item
> to use to tap into
> the primary coil?
> 
> 
> Vince 
> 
> 
>