[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Piezo HV Power Supply



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Fucian-at-aol-dot-com>

In a message dated 4/12/02 2:47:34 PM Eastern Daylight Time, tesla-at-pupman-dot-com 
writes:

<< I used a piezo unit to build a single shot triggered spark gap for use
 in pulse discharge use. They work really well for this, isolating the
 operator from the hv arc. never considered a continuos psu from them?
 Take care,
 Marc M.
  >>
Hi, could you tell me more how yo udid this?Woul dit work for like a 
capacitor discharge device? 450volts -at- 7000uF Electrolytic.~700J
,
Matt