[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: bangs per second with rotary



Original poster: "colin.heath4 by way of Terry Fritz <twftesla-at-qwest-dot-net>" <colin.heath4-at-ntlworld-dot-com>

sorry its 3000 rpm getting confused cheers
colin
----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, April 12, 2002 2:35 PM
Subject: RE: bangs per second with rotary


> Original poster: "Pete Komen by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<pkomen-at-zianet-dot-com>
>
> Colin,
>
> I don't think I have your answers.  8 electrodes * 3600rpm / 60 seconds
per
> minute gives 480 breaks per second.  This is not synchronized with your AC
> power line.  Am I missing something?
>
> Regards,
>
> Pete Komen
>
> Original poster: "colin.heath4 by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <colin.heath4-at-ntlworld-dot-com>
>
> hi all
>         im running my coil at the moment with a 400bps sync rotary gap and
> tried running it at 200bps with my mot power supply with no joy i tried
> getting
> the gap to phase correctly for ages with no joy yet at 400bps i have it
> right
> no problem
> could this be because im using a level shifter and the supply is half wave
> rectified dc so its now running instead of 50hz its 100hz
> could this make the system very hard to tune my gaps running 3600rpm with
8
> electrodes and two posts with the flying electrodes all linked htis gives
me
> a
> presentation approx every 5ms
> many thanks
> colin heath (stiil a lot to learn)
>
>
>
>
>