[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Piezo HV Power Supply



Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-qwest-dot-net>" <evp-at-pacbell-dot-net>

Tesla list wrote:
> 
> Original poster: "David Thomson by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <dave-at-volantis-dot-org>
> 
> Hi Pete,
> 
> I don't know which system of units you are using, but volt/coul does not
> equal farads in any of the four systems I use.  Coul/volts equals farads.

	That is CORRECT. 

> joule = farad * volt^2
> 
> There is no division by two in the equation with volt^2.

	However, that is WRONG.  Look it up in any text or hand book.

> Energy in Joules = C * V**2 / 2

	THAT is correct. Ditto

Ed