[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: winding own transformer



Original poster: "Loudner, Godfrey by way of Terry Fritz <twftesla-at-qwest-dot-net>" <gloudner-at-SINTE.EDU>

Hi All

Mike glass has sent his transformer design program (WinXformer) to
http://www.tesla-2-dot-org/~mikeh so that all tesla coilers can use the program.
Mike writes that Bart can also place the program at his site. The program
will be very useful to homebrew transformer builders.

Godfrey Loudner

> -----Original Message-----
> From:	Tesla list [SMTP:tesla-at-pupman-dot-com]
> Sent:	Tuesday, April 02, 2002 5:15 AM
> To:	tesla-at-pupman-dot-com
> Subject:	RE: winding own transformer
> 
> Original poster: "Loudner, Godfrey by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <gloudner-at-SINTE.EDU>
> 
> Hi Colin
> 
> You will have to use a thinner secondary wire to get more than the
> existing
> number of turns. There's not much window space in a MOT. If you checkout
> http://www.pupman-dot-com/listarchives/2000/March/msg00597.html, Mike offered
> a
> freeware transformer design engine that could be downloaded. The
> downloading
> address is no longer active. I e-mailed Mike about a year ago at
> 'arcsnsparks-at-parlorcity-dot-com' and he sent me the engine. The engine is
> really
> useful. The program even selects the wire gauges. It would be nice if
> someone would contact Mike and ask him to sent the engine to Terry's site.
> But I don't know if Terry's site accepts programs*.
> 
> Godfrey Loudner 
> 
> >>I don't allow executables but may Bart does.  If we can get the program,
> we can find a home for it. - Terry<<
>  
>