[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Dielectric ideas

To: tesla-at-pupman-dot-com
Subject: Re: Dielectric ideas
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 18 Oct 2001 07:50:20 -0600
Resent-Date: Thu, 18 Oct 2001 08:11:53 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <kLznU.A.CqH.pMuz7-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Mr Gregory Peters by way of Terry Fritz <twftesla-at-qwest-dot-net>" <s371034-at-student.uq.edu.au>

Generally the plastic used for overhead transparencies is mylar - very 
lossy and WILL FAIL (I have made many mylar caps). Oil impregnated 
paper is also lossy, and unless you make heaps of units and wire them 
in series, the puncture voltage is too low for tank circuit use.

Greg Peters
Department of Earth Sciences,
University of Queensland, Australia
Phone: 0402 841 677
http://www.geocities-dot-com/gregjpeters

Prev by Date: RE: why 4 Ohms in PARALLEL with trigger coil primary?
Next by Date: Re: TSG and big resistors
Prev by thread: Dielectric ideas
Next by thread: Re: Dielectric ideas
Index(es):
- Date
- Thread