Re: Triggered gap was RE: I guess I'm the new guy now.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>

No machine shop required for the run of the mill triggered gap (unless you
are trying some sort of precision pulsed power application like the Z
machine)

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, October 11, 2001 8:26 PM
Subject: Triggered gap was RE: I guess I'm the new guy now.


> Original poster: "Garry Freemyer by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <garry-at-ndfc-dot-com>
>
> Yep, I'm going to try that triggered gap myself. It just seems that the
> breakthroughs get better and better! I got an MMC from Terry, so long ago,
> the poor fella probably thought I'd never get to trying it, but this gap
> needs a LTR mmc, so that's what I'm going to try.
>
> Only thing that worries me is I don't really have access to a machine shop
> and I don't know if the triggered gap requires one. I be glad when the
specs
> for it are done.
>
>
>