Re: ballast bobbin...again

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Metlicka Marc by way of Terry Fritz <twftesla-at-uswest-dot-net>" <mystuffs-at-orwell-dot-net>

chris,
you could put your pvc pipe in the oven for a while at about 250, once
warm it might slide right on your core section?
i've "kinked" quite a few lengths of pvc by heating to much so you could
end up with a nice bobbin? maybe a layer of wax paper so it slips back
off nice.
marc m.