[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Plexiglas problem

To: tesla-at-pupman-dot-com
Subject: Plexiglas problem
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 27 Jun 2001 11:41:47 -0600
Resent-Date: Wed, 27 Jun 2001 11:42:11 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <2OiMqB.A.6VC.rrhO7-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Andrew Robinson by way of Terry Fritz <twftesla-at-qwest-dot-net>" <poofyman-at-2die4-dot-com>

The same thing happened to me! I would dip the blade in a glass of ice
water about every 5in (or when it started to melt. Use a metal blade. Sand
eges with 60, then 250, and finally steel wool. Works great!!!!!! If you
have any more problems, e-mail me off list. poofyman-at-2die4-dot-com    Bye
-- 

_______________________________________________
FREE Personalized E-mail at Mail-dot-com
http://www.mail-dot-com/?sr=signup

FREE PC-to-Phone calls with Net2Phone
http://www-dot-net2phone-dot-com/cgi-bin/link.cgi?121

Prev by Date: Re: Ballasting question
Next by Date: Re: Skin effect question
Prev by thread: Re: Scanning electron microscope
Next by thread: Re: Plexiglas problem
Index(es):
- Date
- Thread