Re: VTTC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "brian by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ka1bbg1-at-mcttelecom-dot-com>

Hi, welcome and good luck getting the vttc going. there are several very
good vttc guys on here so your in good hands. 1kw rf heater will make a nice
big spark from a vttc! cul brian f.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, June 13, 2001 2:27 PM
Subject: VTTC


> Original poster: "RICHARD HALL by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<richhallpfs-at-mcleodusa-dot-net>
>
> HELLO Fellow coilers
>     This is all new to me so bear with me.  I built my first coil 1957
using an
> 807 It worked good it gave a 1 to 2" brush spark and would burn a hole in
you
> if you didn't use a metal object in your hand.  Maybe it worked ok but now
I
> going to restore it.  Here's where I need help! my old sg coil, tx's caps
have
> all strayed but I still have them. And in my collection I have a thermall
model
> 8b1 rf 1kw heater. It uses a pair of 592/3-200a3 in parallel for its
output its
> tank is gone but it is a neat looking base (platform) for building a vttc.
I
> can Fax circuit dwg. & pic. If someone can help with ideas on a tank and
> secondary thanks Richard hall
> <mailto:richhallpfs-at-hotmail-dot-com>richhallpfs-at-hotmail-dot-com  THANKS AGAIN.
>
>
>
>
>