Re: VTTC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "David Trimmell by way of Terry Fritz <twftesla-at-qwest-dot-net>" <davidt-at-pond-dot-net>

Hi, I wouold be interested in seeing how they wire up a RF heater. There
is some info on my web site on VTTC's, see:
www.ChaoticUniverse-dot-com
Follow the Tesla links. There are also several a vac tube gurus on this
list.

Regards,

David Trimmell

On Wed, 13 Jun 2001, Tesla list wrote:

> Original poster: "RICHARD HALL by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <richhallpfs-at-mcleodusa-dot-net>
> 
> HELLO Fellow coilers
>     This is all new to me so bear with me.  I built my first coil 1957
using an
> 807 It worked good it gave a 1 to 2" brush spark and would burn a hole in you
> if you didn't use a metal object in your hand.  Maybe it worked ok but now I
> going to restore it.  Here's where I need help! my old sg coil, tx's caps
have
> all strayed but I still have them. And in my collection I have a thermall
model
> 8b1 rf 1kw heater. It uses a pair of 592/3-200a3 in parallel for its
output its
> tank is gone but it is a neat looking base (platform) for building a vttc. I
> can Fax circuit dwg. & pic. If someone can help with ideas on a tank and
> secondary thanks Richard hall
> <mailto:richhallpfs-at-hotmail-dot-com>richhallpfs-at-hotmail-dot-com  THANKS AGAIN.    
>  
> 
> 
> 
>