Re: shortcut?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>

320 J won't crush a can unless your design is really good. The voltage is
typically a few hundred volts, and you'll probably have a very nice pulse
discharge cap.  You might contemplate building a single shot type TC, where
the defib discharges into a suitable high current, low voltage primary.


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, June 02, 2001 12:54 PM
Subject: Re: shortcut?


> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<A123X-at-aol-dot-com>
>
> Not likely. It would probably be sufficient to crush cans some, or a coil
> gun. I don't know much about defribulators but if the voltage is pretty
high
> you might be able to just use the charging transformer and use the caps
for
> can crushing when you feel like it. Although it might be good for you and
> your assistant(or who ever is around when you run it) to learn proper use
of
> it, hehe.
>
> Mark
>
> In a message dated 6/2/01 3:13:14 PM Eastern Daylight Time,
tesla-at-pupman-dot-com
> writes:
>
>
> >
> > hi guys ! I AM A NEW COMER TO TESAL (SOMEWHAT NEW). I HAVE A MEDICAL
> > DEFIBRILLTOR THAT PUTS OUT 320 JOULES. CAN THIS BE USED SOMEHOW IN A TC?
I
> > FIND THE MAIL MOST INTERESTING. THANK YOU!
> >
> >                                                           JOHN IN NYC
> >
>
>
>
>
>
>