Re: Does it matter which way i wind my secondary?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Barton B. Anderson by way of Terry Fritz <twftesla-at-uswest-dot-net>" <tesla123-at-pacbell-dot-net>

Robert,

It doesn't matter at all. My coil is wound in opposite directions. Works
fine. Others are wound in
the same direction - they work fine. There's no quantifiable data I'm aware
of that would suggest a
preference.

Take care,
Bart

Tesla list wrote:

> Original poster: "Robert Hughes by way of Terry Fritz
<twftesla-at-uswest-dot-net>" <rfhughes-at-epix-dot-net>
>
> ok, I've been watching this thread since it started and now need a
> question answered. Does it really matter which way I wind my secondary?
> Or primary for that matter? the secondary is made out of 2 in pvc and
> the primary is a cylinder made by using 4 pvc "stilts" with holes
> drilled in them. Thanks!
>
>                                 -Mike Hughes