Re: VARIAC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jason Petrou by way of Terry Fritz <twftesla-at-uswest-dot-net>" <jasonp-at-btinternet-dot-com>

INDUSTRIAL LASER???? ask the geezer if you can pull it apart - oyu should be
able to find some FANTASTIC doorknob caps in there and even if you dont use
them I would buy them off you. Where do u live? (UK or States or what?)

Jason

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, April 11, 2001 2:59 PM
Subject: Re: VARIAC


> Original poster: "will dork by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<vcdmasta-at-hotmail-dot-com>
>
>
> Hello Everyone,
>
> Thanks for the advice from everyone, i went to the junk yard today and
picked
> up the unit. While i was there i also picked up digital monitors for
voltage
> output to transformer. This way, i will flip the switch for the variac,
the
> unti increases one volt per sencond, and then i flip the switch when 120
volts
> is reached, which will be close to the end due to 120 input. Also, i
picked up
> 100 kv gauges from an exray machine for 3 dollars, but i am not sure how i
will
> use them, i only know that for 3 dollars i really couldnt go wrong. The
xray
> machine was complete, but due to its weight the dealer wanted $300 for it.
The
> back panel was off of it and sure enough the complete transformer was
inside,
> including all equipment that i would need to contol it (minus a GOOD
variac). I
> am very tempted to pick this unit up for the transformer. I was wondering
what
> anyone thougt. Also, if anyone wants heavy duty laser equipment, i belive
that
> there is an industrial laser in the! back. i saw it and the unit is about
8
> feet long, 12 by 12 long casing. Looks like it would work. Possible VERY
large
> YAG or NEHE. No clue, but it probably is only $50-100. Well, please let me
know
> what you think about the complete xray machine. Thanks
>
>
> Thanks
>
> Will McManus
>
>
> ----------
> Get your FREE download of MSN Explorer at
> <http://explorer.msn-dot-com>http://explorer.msn-dot-com
>
>
>
>
>
>