[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: is this tube good for a VTTC?

Hi Keven,

Haven't played with that particular tube, but a one or two of them would 
work just fine in a VTTC. Any Triode will work well. See some schematics at 
my web site.


David Trimmell

At 05:44 AM 9/2/00, you wrote:
>Original poster: "Kevin D" <teslacoilfreak1-at-mediaone-dot-net>
>I was wondering if a Svetlana 572B "High-Mu Triode"
>could be used in a VTTC circuit?
>Here are its basic specs: (intermittant commercial and ameteur
>service-linear RF power amp. class B grounded
>grid max. raitings)
>Amplification factor: 170
>DC plate V: 2,750V
>DC plate I:  275mA
>DC plate input: 600W
>DC grid I: 50mA
>plate dissipation: 160W
>Also does anyone know were I might find a schematic that
>uses this tube or similar tube and if not would I be able to use a 833A type
>Thanks For Any Help!!
>Kevin D.