Re: VTTC related question

["Mark S Graalman" <teslac-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

 Under normal conditons the plate should show a red to orange
color in the center. In these tubes, any gas is "gettered"
by a special coating on the anode material and the anode
must get hot enough for the gettering action to take place.
 Fan cooling is recommended.

Mark Graalman  WB8JKR (TCBA#1399)


On Wed, 04 Oct 2000 18:17:24 -0600 "Tesla list" <tesla-at-pupman-dot-com>
writes:
> Original poster: "Steve Rodway" <legion-at-bigfoot-dot-com> 
> 
> 	Do any of the VTTC coilers out there know what colour a 
> graphite plate
> 572B tube is meant to show on the plate when running at 100% rated
> power?
> 
> 		Steve
> 
> 
> 

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno-dot-com/get/tagj.