RE: solvents?

["Dr Brian H Le Page" <B.H.Le-Page-at-xxxxxxxxxxxx> (by way of Terry Fritz <twftesla-at-xxxxxxxxxx>)]

Matt

I have successfully used dichloromethane to remove epoxy type encapsulation.
It did not seem to destroy the wire insulation on a nst, although that is a
naked eye assessment.

B

Dr Brian H Le Page
Research Fellow
Composites Research Group
School of Mechanical and Materials Engineering
University of Surrey
Guildford
Surrey
GU2 7XH
Tel. 01483 300800 x2439
Fax. 01483 876291
mailto:B.H.Le-Page-at-surrey.ac.uk

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: 07 November 2000 03:26
To: tesla-at-pupman-dot-com
Subject: solvents?


Original poster: Fucian-at-aol-dot-com

Hi all,any one know of a solvant that will dissolve hard epoxy?I have a high
voltage inverter transformer that has been epoxied together and it wont come
apart.Its a ferrite core so it will crumble if brute force is used.Thanx
everyone,

matt