Re: Solid Secondary?

• To: tesla-at-pupman-dot-com
• Subject: Re: Solid Secondary?
• From: "Mike Harrison" <mike-at-whitewing.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 02 Mar 2000 17:05:35 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

On Wed, 01 Mar 2000 16:53:07 -0700, you wrote:

>Original Poster: "Bob Wroblewski" <bwroblewski-at-yahoo-dot-com> 
>
>  There are some scrap clear acrylic rods of 1.5 to 2
>inches diameter at work in the machine shop that are
>calling me to wind them!
>  I know acrylic (thermoplastic) isn't the best
>material because of combustability but I'm talking a
>low power, tabletop demo coil.   
Might look interesting if you space-wound an acrylic form, so some
light could get through! How about putting a lamp at the bottom to
light it up from inside (in series with the ground wire perhaps!).

• Prev: RE: 25kVA neon transformer
• Next: RE: Question about ballasting and VA
• Index(es):
  • Main
  • Thread