[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: First VTTC light, and a few questions
In a message dated 7/21/00 9:15:17 AM Central Daylight Time, tesla-at-pupman-dot-com
writes:
<< Yes, it might be possible that the RF is simply affecting the meter
reading, but not really raising the voltage on the filament. If the
filament voltage is really increasing, then it should get visibly
brighter as the voltage rises >>
Hi John,
Yes, that is exactly what happens. I was using a TV xformer with CT
filaments. I had meters in the plate and fil wiring. The plates on the type
10 tubes were a cheerful
red color and suddenly the filament voltage on the precious 10s is pushing 11
volts
without any increase in filament intensity. That was the clue that told me
RF. Bypassing the
filaments directly at the tube socket solved the problem.
Cheers,
Ralph Zekelman