[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
help -I want to buy pulse caps for MMC - anyone selling new ones
Help,
I seem to recall messages in the archive of someone purchasing pulse caps in
bulk and reselling them at cost around $1.50 each and they were also
including the bleed resistors. Does anyone have any of these 'self healing'
pulse caps, in the .033-.055uf range around 1600 vdc?
I wanted to pick up around 75 of the following :
http://www.wima-dot-com/navig/fkp1.htm
Here the description;
Polypropylene capacitors for pulse applications
with metal foil electrodes, internally series-
connected for very high current ratings
For extremely high pulse ratings because of metal foil electrodes and metal
sprayed end-surface contacts. Self-healing construction. Extremely low
dissipation factor (tan delta) and ESR. High insulation resistance. Low
dielectric absorption. Preferred applications: Damping and commutation
capacitors in switch mode power supplies, static frequency changes in drive
and power electronics, deflection systems in monitors and TV-sets. Close
tolerances. Available taped and reeled up to and including case size 15 x
26 x 31.5/PCM 27.5 mm.
The price I got was $4 ea with a $500 minimum. I figured they might be
$2.50 on the high end. Heh!
Thanks everyone,
John M.