Re: weather influence on TC performance

• To: tesla-at-pupman-dot-com
• Subject: Re: weather influence on TC performance
• From: "Barton B. Anderson" <tesla123-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 21 Feb 2000 12:53:57 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

> Original Poster: "Alex Crow" <user-at-alexcrow.clara-dot-net>

Hi Alex,

I think you will like the extra turns, but I don't think it will cure your
flashover condition. It's more likely to be your pri/sec coupling. Also, I've
done the same thing to my coil (added turns/length/etc.). The splice should
hold up fine. BTW, when I splice, I drill 2 small holes into the secondary, run
the wire ends into the holes, solder on the inside, sand smooth, then add
several coats of polyurethane. After the poly has dried, I throw a bead of
silicon on it (it's on the inside so nothing is visible). It has held up great.
I actually have 3 of these connections on my secondary from various changes.

Bart

> <snip>
> I have now gone up to a near 5:1 ratio after absorbing a few
> posts on the list. Maybe the extended top-to-bottom difference would help?
>
> I just hope that wire-splice that Richie B told me about holds up - looks a
> little rough now but a few more varnish coats and I hope all should be OK.
>
> Alex Crow

• Prev: Re: G10
• Next: Re: First Pole Pig TC in Germany??
• Index(es):
  • Main
  • Thread