Portable Grounding for 6" coil

• To: tesla-at-pupman-dot-com
• Subject: Portable Grounding for 6" coil
• From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sat, 16 Oct 1999 12:14:47 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

It being halloween and all, the company is having a bit of a party.
I've been thinking of taking my 6" coil in for fun (otherwise, I'll stick
to my 3.5" :( )
The problem is, there isn't much in the way of a ground available to me
there (concrete and asphalt as far as the eye can see...)
There is however, our 'quarentine' cage: about 11' high and 15-20' long
chain link (not including where it turns the corner), Do you think this
would
work as a suitable counterpoise for a coil running in the 2KVA range?
If so, how close would I have to bring the coil?


Thanks!
Michael Baumann
Coiler, Homebrewer, Nerd...mycroft-at-access1-dot-net
http://www.access1-dot-net/mycroft

• Prev: Re: Aluminum electrodes in TCBOR static gap
• Next: Re: flyback TC
• Index(es):
  • Main
  • Thread