[Prev][Next][Index][Thread]

Re: tapered secondary form?



Tesla List wrote:
> 
> Original Poster: "Mad Coiler" <tesla_coiler-at-hotmail-dot-com>
> 
> To Bert and other coilers,
> 
> Thanks, Bert, for the response. I was starting to think the same way.
> Putting the bases together may also make it easier to connect the two
> together. This brings up my next question, which is: any recomendations
> on how to affix the two halves together? I assume you dont want any
> metal of any sort in the center of the socndary? I also assume that
> judging the size of the coil it will most likely be heavy and epoxy
> alone may not be sufficient. Does any have any tricks they use?
> 
> Thanks,
> Tristan Stewart (KC2EBM)
<SNIP>


Tristan,

I'd drill matching holes in the bases of the trashcans and bolt them
together using nylon bolts and screws, with large plastic washers on
each side. 

-- Bert --