Re: Spark Gap: Flat vs. Cylinder

• To: tesla-at-pupman-dot-com
• Subject: Re: Spark Gap: Flat vs. Cylinder
• From: Finn Hammer <f-hammer-at-post5.tele.dk> (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Mon, 12 Apr 1999 17:06:13 -0600
• Approved: twf-at-verinet-dot-com

Alan, all:

If it can be of some inspiration, the gap that I have made for my soon
to fire coil, is very similar to the one you describe, as well as
Terry`s and Chuck`s.
It has fully adjustable electrodes, so that the gaplength per gap can be
adjusted at will, and the electrodes can be removed for cleaning etc.

I wouldn`t have talked about it before trying it out, but after reading
this thread, i`m sure it will, and I think it has some nice features
worth considering. 

see it at:

Http://home5.inet.tele.dk/f-hammer/tesla/tesla.htm

• Prev: Re: new cap
• Next: Re: Rolled PE Caps
• Index(es):
  • Main
  • Thread