Re: Rolled PE Caps

• To: tesla-at-pupman-dot-com
• Subject: Re: Rolled PE Caps
• From: Robert Volk <smrtmny2-at-earthlink-dot-net> (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Mon, 12 Apr 1999 17:10:56 -0600
• Approved: twf-at-verinet-dot-com

Kevin,
I used Grocery store grade  heavy duty aluminum foil. 12" x 50' per box,
Reynolds Wrap. It's been more than sufficient for my needs.

I believe heavy duty foil is either .001 or .002 inches thick - I'll
have to check my notes as I was recently researching tin foil thickness.

Bob Volk

> 
> i looked at mcmaster-carr for some foil rolls, but am not sure what
> thinkness i am looking for, my only problem with Al Flashing is that it is
> too darn thick, isn't there some happy medium between falshing and foil that
> would be robust enough yet easily rollable?  i don't know how to compare
> thicknesses of foils either cause i don't have a baseline.
> 
> thanks
> kevin wahila

• Prev: Re: Spark Gap: Flat vs. Cylinder
• Next: Re: Hello ALL
• Index(es):
  • Main
  • Thread