----------
From: Hollmike-at-aol-dot-com [SMTP:Hollmike-at-aol-dot-com]
Sent: Friday, May 29, 1998 2:30 AM
To: tesla-at-pupman-dot-com
Subject: Re: sync-gap problems
Alan,
I have not used a rotary gap before, so this is just guessing, but maybe
you need to adjust the timing(dwell angle?) by rotating the disk on the motor
shaft. It may be firing at a time that is not the right(ie the cap is not
fully charged).
Good luck,
Mike Hollingsworth