Re: Mutual Inductance and Coupling Measurement

To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
Subject: Re: Mutual Inductance and Coupling Measurement
From: Tesla List <tesla-at-stic-dot-net>
Date: Sun, 10 Aug 1997 21:11:31 -0500
Approved: tesla-at-stic-dot-net


From: 	Greg Leyh[SMTP:lod-at-pacbell-dot-net]
Sent: 	Sunday, August 10, 1997 7:26 PM
To: 	Tesla List
Subject: 	Re: Mutual Inductance and Coupling Measurement

DR.RESONANCE wrote:


> Perhaps trying the same experiment with an older vacuum tube signal
> generator (vac. tube provides more drive potential) with a 2 v. drive.
> Then repeat the same experiment on the same coil with your 120 v method and
> compare the results.  We have always use the sig. generator method but will
> try the 120 v method on a coil next week to see if there is any difference.

I would try the HV sig gen if I had one :<

I'll have to wait for the results of your 120V test, as my coil is in pieces
at the present time.


-GL