RE: How clean is clean enough?

To: tesla-at-poodle.pupman-dot-com
Subject: RE: How clean is clean enough?
From: Tesla List <tesla-at-stic-dot-net>
Date: Thu, 03 Apr 1997 11:09:22 -0600
Approved: tesla-at-stic-dot-net

Subject: 
        RE: How clean is clean enough?
  Date: 
        Thu, 3 Apr 1997 09:21:21 -0500
  From: 
        Heinz Wahl <hwahl-at-jtc-campus.moric-dot-org>
    To: 
        "'Tesla List'" <tesla-at-pupman-dot-com>

Gas works good. Put them in to soak and forget them for about a week or
so.

Heinz Wahl

Politically corrected:

Happiness is an inexpensive Tesla.....

----------
From:  Tesla List [SMTP:tesla-at-pupman-dot-com]
Sent:  Thursday, April 03, 1997 12:21 AM
To:  tesla-at-poodle.pupman-dot-com
Subject:  How clean is clean enough?

Subject: 
           How clean is clean enough?
      Date: 
           Wed, 02 Apr 1997 17:36:06 -0800
      From: 
           Roderick Maxwell <major-at-vicksburg-dot-com>
        To: 
           tesla-at-pupman-dot-com
References: 
           1

I have cleaned my 15kv neon secondaries so well you can see the
stamped
  serial numbers on the paper covering. But when you look at the side of
  the secondaries you can still see tar between the winding layers in
  places. The question is do you have to remove all of the tar? The only
  way I believe you could do it would be to soak, and soak ,and
soak,them
  in solvent solvent until they came clean.

                                   Frankensteins Helper

Prev: Glass laminate
Next: Re: Broadcast Capacitors
Index(es):
- Main
- Thread