Re: Optimal toroid elevation

• To: tesla-at-pupman-dot-com
• Subject: Re: Optimal toroid elevation
• From: "Marco Denicolai" <Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 25 May 2000 07:56:25 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Tesla List <tesla-at-pupman-dot-com> on 25.05.2000 03:14:56

To:   tesla-at-pupman-dot-com
cc:    (bcc: Marco Denicolai/MARTIS)
Subject:  Re: Optimal toroid elevation




Hi Bart.


>Original Poster: "Barton B. Anderson" <tesla123-at-pacbell-dot-net>

>I have a question here regarding the corona ring. Does it get connected with
>the toroid or just sit in the field?

In my understanding it must be connected: that is also the solution used in a
100 kV DC generator used at the university.

>Marco, you may want to consider making the toroid movable up and down. Malcolm
>posted in a reply this week about fine tuning the resonator simply by raising
>or lowering the toroid. Makes a lot of sense to me.

Ok, but the toroid is going to be at about 3 meters from ground, while the
primary is at 0.5 meters. Isn't it easier to operate on the primary tap?

Regards

• Prev: Cap and RFC Questions
• Next: Nickel spray
• Index(es):
  • Main
  • Thread