RE: new pics!!

["Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Some great arcs and pictures. I'd worry about those arcs headed straight
down your secondary though. Doesn't look like the toroid is providing enough
field control near the top windings. Might try a bigger toroid chord or
lower it a bit.

Just my opinion,
Brian B.

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Tuesday, August 01, 2000 9:03 PM
To: tesla-at-pupman-dot-com
Subject: new pics!!


Original poster: "D.Wightman" <dwightman-at-mmcable-dot-com> 

after making repairs on the secondary we ran the coil for all we could get
out
of it...this is an 8 inch diameter by 24 and 3/4 inch winding length.. on
top
of it you can see the 2 angel food cake pans, one rightside up and one on
top
of that one upside down,, followed by a large size pizza pan ,available at
walmart "thanks kevin!!!" and some 4 inch aluminum dryer duct..you see the
metal rebar attached to the beam there, well that is 6 feet 4 inches,,, the
metal support beam is 8 feet 9 inches to the torroid...the coil is at a
angle
to the metal structure so i could see it while operating it..i am behind the
beam there  "wow" talk about a thrill..go to
<http://home.mmcable-dot-com/surplus>http://home.mmcable-dot-com/surplus
to see them , and thanks to all of the information on the list for making
the
sparks fly!!!!