FW: High Voltage Snubber .1u 3kV = rejects caps

["Dale Hall" <Dale.Hall-at-trw-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Jeff,
There have been several posts citing great success with the Hosfelt .1uF 3
kV caps.

Do you have any detail (conditions) on how they have failed ?
ref: "someone"
(can we rule out misuse/abuse?)

How was the determination of factory rejects arrived at ? 
or is it just conjecture ?

Regards, Dale

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com] 
Sent: Thursday, July 27, 2000 7:16 AM
To: tesla-at-pupman-dot-com
Subject: High Voltage Snubber .1u 3kV = rejects caps

Original poster: "Jeffery Pederson" <kd4lyh-at-webtv-dot-net> 

Hello,
Earlier today I mentioned that there was some .1mfd 3000vdc made by G.E
for sale . Someone contacted me off the list about these caps . Some
people have had trouble with these caps. I guess these are factory
rejects offered at a low price thru an electronics outlet. I was just
trying to help people out on the list. The moral of my story is if it
sounds to good to be true then it is. I have not purchased any of these
caps for an mmc application.
Regards Jeff