>> But I may be looking in the completely wrong direction
Perhaps more literally than you think? Have you tried swapping around the grid coil leads to make sure the coil is not simply phased incorrectly?
Best,
Matt Lewis, Fairlee VT
-----Original Message-----
From: MIke Widlar <mike@xxxxxxxxxx>
To: tcml@xxxxxxxxxxxxxxx
Sent: Mon, Sep 13, 2021 10:45 pm
Subject: [TCML] Help with VTTC build(HF-201)
I'm looking for a direction to bring my project to life. I'm attempting to
build a VTTC using a HF-201 vacuum tube. I've attached the tube specs, as
built schematics and text file from JAVATC of my coil. I am not seeing any
oscillation with my build. For the plate voltage, I am using a large 1300
VAC transformer with a voltage multiplier. It is using a Veriac to control
the input transformer voltage to allow control of the plate voltage. I
have a suspicion that I don't have enough turns on the grid coil to induce a
large enough grid current, but I may be looking in the completely wrong
direction.
Any input would be greatly appreciated.
Thanks,
Mike
_______________________________________________
Tesla mailing list -- tcml@xxxxxxxxxxxxxxx
To unsubscribe send an email to tcml-leave@xxxxxxxxxxxxxxx
_______________________________________________
Tesla mailing list -- tcml@xxxxxxxxxxxxxxx
To unsubscribe send an email to tcml-leave@xxxxxxxxxxxxxxx