What is the bandwidth for these probes?
> On 12/13/2021 9:22 AM BrianB <brianb@xxxxxxxxxx> wrote:
>
>
> Hi,
>
> Recently there has been a lot of discussion regarding measuring
> parameters on Tesla Coils. I have a set of "Terry Fritz Fiber Probes"
> that I spent close to $500.00 on. If someone is interested in them I
> would be willing to sell them at a very reduced price. Email me directly
> if you want Terry's design document or some pictures.
>
> The following is a quick description from Terry's document circ 1999.
>
> Rev. 4 VI Probe Theory
> The VI Probe consists of three main parts. There is a transducer that
> turns either high voltages or high currents into smaller signals. A
> transmitter that
> takes the small signal from the transducer and converts it into an
> analog light
> signal. That signal is sent out over a fiber optic cable to a receiver
> where the light
> signals are converted back to electrical signals again. The fiber cable
> provides
> total isolation between the transmitters and the receiver.
>
> 73,
> BrianB
> _______________________________________________
> Tesla mailing list -- tcml@xxxxxxxxxxxxxxx
> To unsubscribe send an email to tcml-leave@xxxxxxxxxxxxxxx