[Home][2020 Index] [TCML] MMC Safety resistors [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] MMC Safety resistors



A question on bleeders, I understand the best method is to use a bleeder on
each Capacitor. On The MMC I am building it will difficult, not impossible,
to do this. Can I use one resistor strategically placed to accomplish this,
if so where would be best place to put it?
It is not a very large MMC [20kv/5nf].
Adam J.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla