Thanks for the reply, will look up some radio guys.
-----Original Message-----
From: Tesla [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of Roger
Sent: August 8, 2020 11:27 AM
To: Tesla Coil Mailing List
Subject: Re: [TCML] Tube for coil
Hi shaun, If you don't get any takers you could probably find a ham radio
operator that would take it off your hands. That is a high MU type tube
(lots of gain) which would make it desirable for a linear amplifier. I'm
sure it would work well for a tube coil too but I have always ended up
using Medium MU tubes in my big tube coils because they are a lot cheaper
on the secondary market.
Roger
On Fri, Aug 7, 2020 at 6:57 PM shaun <snoggle@xxxxxxxxxxxxxx> wrote:
> Hello all I have a item to sell if anyone is interested. It is a tube out
> of
> a working mri machine. I had for for a few years for a coil but never got
> around to building.
>
>
>
> The tube is a 3CPX5000A7, any one interested get a hold of me at
> snoggle400200@xxxxxxxxx
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla